Residential privacy
Lineo, Verto or Bosco when the target is Sichtschutz, garden rhythm and coordinated RAL finish.
Boundary length, post spacing, slope, privacy level and cleaning access.
VISIOMODFence & Gate Systems
Aluminium and WPC fence solutions with integrated gates for residential and commercial properties.
RAILING ROUTE
Choose the railing family by edge condition.
Start from the way the edge is built: base-channel glass, post-fixed glass, point-shoe glass, aluminium infill, Juliet guard or boundary system. The model routes stay on this page so the buyer can compare without getting lost.
Selected route
Fence, gate and boundary systems
For projects where railing language continues into garden boundaries, pool perimeters, gates, glass wind screens or aluminium privacy systems.
Best for
Privacy boundaryPool perimeter routeMatching gates
Fixing route to verify
Base-plate on concreteEmbedded post routeGate/access review
Specification checks
Panel heightWind exposureGate/access routePool safety review
Model routes
Use this as a first-pass route only. Final glass build-up, fixing, post spacing and local approval should be checked from project data.
VF-LIN
Horizontal aluminium fence
Lineo slat route for privacy and architectural rhythm.
VF-VRTVertical aluminium fence
Verto route for vertical rhythm and boundary height.
VF-CRYGlass wind-protection fence
Cristallo glass panel route for wind protection with visibility.
VF-POOLPool perimeter fence route
Glass or aluminium boundary route for pool edges where visibility, gate access and local safety review must be checked before quote.
Use this as a first-pass route only. Final glass build-up, fixing, post spacing and local approval should be checked from project data.
SPECIFIER PACK
Fence, gate and perimeter scope in one technical route
Treat the boundary as a system before splitting panels, posts and gates into quote lines. This keeps privacy, acoustic intent, access control, foundations and wind exposure visible from the first project review.
Application matrix
Acoustic boundary
A continuous route when road or rail noise matters and height, gaps and returns must be reviewed.
Noise source, receiver height, uninterrupted run, gate gaps and local acoustic expectation.
Gate and access
Porta when the fence line must carry pedestrian, swing or sliding gate language without visual discontinuity.
Opening width, automation, photocells, intercom, hinge post and emergency release.
Glass wind screen
Cristallo where wind protection and view retention matter more than full privacy.
Glass height, edge condition, wind exposure, cleaning route and safety review.
Document route
- Product sheet
Panel, post, gate and finish route.
- Installation route
Foundation, post line, slope and access checks.
- CAD/BIM request
Project-request route, not a generic download promise.
- Maintenance guide
Coating, WPC, glass and gate-care schedule.
- Project checklist
Inputs before quote and engineering review.
Known project checks
- Wind load, post spacing and foundation depth depend on site exposure and local review.
- Acoustic reduction is project-specific unless a tested build-up is cited.
- Gate automation needs safety-device, power and access-control review before final quote.
- Coastal or high-corrosion sites should define finish, cleaning interval and hardware grade early.
Available Models (7)
FlagshipEssentials
VF-LINVisioMod Lineo — Horizontal Aluminium Fence
Horizontal aluminium slat fence engineered for residential boundaries, pool perimeters and hospitality terraces. Three slat widths (30/50/80 mm) calibrate the privacy-to-airflow balance — fine louvres that break wind turbulence, residential defaults, or near-solid planes for street boundaries. Concealed posts deliver an identical reading on both sides; no visible fasteners, no front-back distinction. Spans up to 2500 mm reduce post count on long runs. Heights 900–2000 mm, Qualicoat Class 2 powder coat in any RAL or three woodgrain laminates. A low-maintenance alternative to timber, mesh and WPC fencing — reviewed for inland and coastal wind exposure by project.
- 4 slat widths: 30 / 50 / 80 / 140 mm flat infill
- Identical view both sides — no visible fasteners
- Open or closed slat packing
VF-VRTEssentials
VisioMod Verto — Vertical Aluminium Slat Fence
Vertical aluminium slat fence — Lineo rotated 90°. Same RAL palette, same depth, vertical rhythm.
VF-BSCEssentials
VisioMod Bosco — WPC + Aluminium Fence
WPC + aluminium hybrid fence for residential gardens, biophilic facades and warm-palette boundaries. The infill is 60 % wood fibre, 30 % HDPE and 10 % UV stabilisers, so the surface reads like timber but does not warp, rot or silver. Two profile widths — Standard 100 mm and Grande 200 mm — let you tune the rhythm from fine to bold. Five woodgrain finishes (Teak, Walnut, Oak, Anthracite Wood, Driftwood). Maintenance: rinse twice a year, with colour-stability terms confirmed by finish and exposure. A low-maintenance alternative to larch, cedar and PVC fence systems.
VF-CRYSignature
VisioMod Cristallo — Tempered Glass Fence
Tempered glass fence for terrace edges, infinity pools, sea-view properties and balcony perimeters. 10 mm ESG safety glass per EN 12150 standard (12 mm option above 1.8 m), with optional heat-soaked treatment per EN 14179 to neutralise nickel-sulfide failure risk on free-standing vertical glass. Four glass finishes — clear, satin, bronze, smoke. The 25 × 40 mm aluminium U-channel frame is concealed below the glass line, so the panel reads as a sheet of view without a fence. A wind-shelter alternative to masonry parapets and steel railings — privacy where you want it, view where you don't.
VF-PRTSystem
VisioMod Porta — Gate Program
Gate program for every VisioMod fence run — the entry point that speaks the same language as the boundary. Four gate types: pedestrian (max 1100 × 2000 mm), single-leaf swing (1500 × 2000), double-leaf swing (4000 × 2000 clear opening) and cantilever sliding (6000 × 2000). Eight infill designs matching the seven fence series plus mixed-line panels. Manual or radio-controlled motorised drive (230 V or 24 V DC solar-compatible) with four access-control options: keypad, RFID, BLE smartphone, video intercom. 3D-adjustable hinges and integrated mortise lock standard.
VF-LUMSmart
VisioMod Lumina — LED-Integrated Fence System
LED-integrated fence panels and post caps. Backlit, pixelated, linear strip or cap LED — IP68 + smart-home control.
VF-MODSystem
VisioMod Modulo — Post System, Accessories & Bespoke Service
Bespoke fence review service. Send a sketch or brief — we review the panel route, quotation inputs and fabrication path before production.
VISIOMOD SYSTEMVisioMod System — one platform, seven design lines
All seven design lines share the same post and frame architecture. That means a single fence run can mix series — Cristallo glass at the bottom, Lineo slats above, an Inciso laser-cut accent at the gate. The Configurator visualises the mix and ships it as one fabricated panel.
Lineo+Cristallo
Horizontal Aluminium Fence · Tempered Glass Fence
Lineo+Lumina
Horizontal Aluminium Fence · LED-Integrated Fence System
Bosco+Cristallo
WPC + Aluminium Fence · Tempered Glass Fence
VisioMod System
Close the sides. Open the evening.
SPECIFIER PROOF
Fence and gate systems specified as one architectural boundary
The VisioMod fence range is presented as a coordinated system: aluminium and WPC privacy panels, glass wind protection, matching gates, LED integration and post/accessory logic can be combined before a project moves to acoustic review, project review or quote.
Panel families by privacy need
The category surfaces the practical difference between open rhythm, full privacy, timber warmth, glass visibility and wind-protection intent.
- Lineo and Verto aluminium slat systems
- Bosco WPC + aluminium hybrid panels
- Cristallo tempered glass wind protection
Gate and control readiness
Gate specification is made visible at hub level so the boundary can be planned as a complete entrance and access-control system instead of isolated panels.
- Pedestrian, swing and cantilever sliding gates
- Manual or radio-controlled motorised operation
- Keypad, RFID, smartphone or video intercom access
System proof for specifiers
Technical signals help homeowners, architects and dealers qualify spans, finish, wind exposure, acoustic need and accessories before requesting drawings.
- EN 1991-1-4 wind action basis
- Qualicoat Class 2 powder coat, any RAL
- Modulo posts, LED and bespoke project-review service
Boundary planning route
The page connects fence selection to the wind-load and acoustic tools so high-exposure sites, road-facing boundaries and commercial entrances are not treated as simple catalogue choices.
- Fence wind-load pre-check
- Acoustic guide for road and rail exposure
- Project-review and quote request after system family is selected
Before fence, gate and access scope are split
Confirm boundary length, post line, gate opening, exposure and acoustic expectation so panels, gates and accessories are treated as one system.
PRODUCT ANSWERS
Practical answers for fence, gate and boundary planning
These answers help search engines and buyers understand VisioMod fences as a complete boundary system, not isolated panels.
How should a VisioMod privacy fence project be planned first?
Plan the full boundary before selecting panels: boundary length, post line, gate openings, Sichtschutz or privacy target, slat openness, wind exposure, acoustic expectation, lighting and access control all affect the system route.
Check wind exposure →Which VisioMod fence systems fit Sichtschutz or privacy searches?
Lineo and Verto cover aluminium slat privacy fences, Bosco covers WPC garden privacy, Cristallo keeps views open as a glass windbreak, and Porta carries the same language into pedestrian or driveway gates.
Start with Lineo →When is an acoustic fence route relevant?
Use the acoustic route for road-facing, rail-facing or commercial boundaries where noise reduction matters. The fence family, height, continuity and site conditions should be reviewed before treating the project as a simple privacy fence.
Open acoustic tool →Should gates be specified separately from fence panels?
For pricing they may be listed separately, but for design and technical review they should be planned together so panel rhythm, gate opening, posts, access control and finish remain consistent.
Review structural references →SPECIFICATION REFERENCES
Fence engineering and acoustic tools
Connect the boundary system to wind-load, surface-treatment and acoustic references before moving from product family to project review or quote.
Fence wind-load calculator
Eurocode 1 country and city presets for fence and glass-railing projects.
Acoustic calculatorRoad and rail noise reduction estimates for fence and boundary layouts.
Structural standardsEN 1991 wind and snow references linked to VisioMod product families.
EN 1793-2 acoustic guideTransmission classes and realistic dB(A) expectations for acoustic fences.
Market routesOpen buyer-intent pages that connect this product family to country, channel and project searches.
PROJECT SELECTION CHECKLIST
Project data that decides the fence and gate route
Plan the boundary as one system before splitting panels, gates and accessories into separate quote lines.
- Boundary layout
- total length, corners, level changes, post line and site access
- Panel intent
- privacy, acoustic screening, glass wind protection or open architectural rhythm
- Gate scope
- pedestrian, swing, sliding, automation, intercom and access-control needs
- Exposure
- wind, road noise, rail noise, corrosion risk and lighting or accessory plan